Agar Mould-X | Mould Exterminator

Mould-X is a mould exterminator for killing mould and mildew. It removes mould stains and dirt from hard surfaces. Mould-X can be used for both indoor and outdoor areas.

Key Benefits:

• Mould-X destroys mould and mildew.
• Mould-X removes mould stains, dirt, fats, oils, soap build-up and other soilage.

How Does It Work?

Mould-X contains available chlorine which is present in solution in the form of sodium hypochlorite and hypochlorous acid. Hypochlorous acid is a powerful germ-killing agent which kills mould and mildew. Mould-X also contains caustic alkali and detergents to provide an excellent cleaning action.

Application:

1. Mould-X is ready to use. No mixing required.
2. Always pre-test Mould-X in an inconspicuous place before use to ensure no unwanted reactions occur.
3. Apply Mould-X via spray, mop or cloth.
4. Scrub with a nylon brush to ensure that Mould-X gets into all crevices.
5. Leave in contact with the surface for 10 minutes.
6. Rinse thoroughly with clean water and allow to dry.
7. Repeat the process, if necessary, until all staining has been removed.

Do not mix with detergents or other chemicals. Do not allow to contact carpets, fabrics or alkali-sensitive surfaces. Observe the Use-by Date printed on the label. Store below 25°C and away from direct sunlight

Contains: Sodium Hypochlorite less than 10%, Sodium Hydroxide less than 2%, Surfactants less than 10% and water to 100%.